Complete differential assembly with 3.07 ratio gears. Originally designed for 01-02 Vipers these differentials have the larger 7/16 ring gear bolts for extra strength. Direct replacement for earlier model Vipers if desired. Rear cover sold separately.
Fits all 1993-2002 Vipers
This 3.07 ratio differential was originally used on the 2003-2006 Vipers. Long since discontinued from Chrysler, Viper Parts USA has brand new OE differentials in stock.
Fits all 2003-2006 Vipers
Replace those worn out rubber front differential mounts with mounts that will last. Only Delrin mounts will withstand the torque abuse given by the Viper's V-10 heart. A must for racers. Sold as a pair.
Fits all 2003 - 2017 Vipers
Complete differential assembly with 3.07 ratio gears. Originally designed for 92-97 Vipers these differentials have the 3/8 inch gear bolts. Rear cover sold separately.
Fits all 1992-1997 Vipers
Genuine Chrysler replacement posi unit for 92-00 Vipers.
Unit is designed for 3/8" ring gear bolts not the larger 7/16" bolts found on later Vipers.
Fits all 1992 - 2000 Vipers.
We offer Quaife Differentials for all Vipers. This torque-biasing differential greatly reduces the “push” associated with a standard locking differential in hi-speed cornering. No adjustments or special oils required = low maintenance. Pictured is the differential for a Competition Coupe. Available as a complete differential or as a kit to convert your current differential.
Call for CURRENT PRICING
Fits all 1992-2010 Vipers
We carry and stock Dana HD stub axles. Made from forged steel, these stub axles will replace your worn or broken OE axles perfectly. (03-06 Long axle pictured). Sold Each. Limited Availability Call us before Ordering.
Fits all 2003 - 2006 Vipers.
We carry and stock Dana HD stub axles. Made from forged steel, these stub axles will replace your worn or broken OE axles perfectly. (03-06) Short axle pictured). Sold Each. Limited Availability. Call us Before Ordering.
Fits all 2003 - 2006 Vipers.
We carry and stock Dana HD stub axles. Made from forged steel, these stub axles will replace your worn or broken OE axles perfectly. (08-10 Long axle pictured). Sold Each.
Fits all 2008-2010 Vipers.
We carry and stock Dana HD stub axles. Made from forged steel, these stub axles will replace your worn or broken OE axles perfectly. (08-10 Short axle pictured on left). Sold Each.
Fits all 2008 - 2010 Vipers.
We carry and stock Dana HD stub axles. Made from forged steel, these stub axles will replace your worn or broken OE axles perfectly. (92-02 Long axle pictured). Sold Each. Limited Availability. Call us Before Ordering.
Fits all 1992 - 2002 Vipers.
Designed to replace original equipment engine mounts in all Dodge Vipers from 1992 thru 2010.
Major reduction of engine and transmission movement in the chassis. Reduces missed shifts.Improves exhaust life due to flex, especially important on headers without flex couplers.
Reduces secondary chassis movements thereby increasing the effectiveness of shock dampers. No modifications required. Installation is done without engine or exhaust removal. Unique internal design eliminates separation.
Recommendation: use in conjunction with hi-perf trans mount.
92-96 RT/10, 97-02 RT/10, 96-02 GTS, SRT/10 Convertible, SRT/10 Coupe, Competition Coupe, 08+ SRT/10 Convertible, 08+ SRT/10 Coupe
Weighs only 17 lbs. Dramatically improves throttle response and rpms. A must for any competition use of your vehicle. Balanced and ready to use. |
Fits all 1992 - 2002 Vipers.
Weighs only 17 lbs. Dramatically improves throttle response and rpms. A must for any competition use of your vehicle. Balanced and ready to use.
Fits all 2003-2006 Vipers
Replacement Tilton Style flywheel for 7.25" specific clutch assemblies.
Call for current Price.
Fits all 2003-2010 Vipers
Original Equipment Flywheel for 2008-2010 with Dual Disc Clutch.
Fits 2008-2010 Viper.
Since the creation of the 2003 Viper SRT-10, the Viper has been made with hollow rear cv shafts. Even the Comp Coupe came with hollow shafts - for apparent weight savings. OEM shafts work good for the average daily driver, but if you decide to race the car (even on the weekend track outing), the Heavy Duty Shafts are what you need. Just as the heading states, these are solid shafts, not hollow. The increased torque rating of these shafts are essential for a race car, turbo charged car, super charged car, or for anyone that likes to realize the power of their Viper. Sold In Pairs Only.
Fits all 2003-2010 SRT-10 Vipers
All Competition Coupes
Viper Parts USA is offering our Super Duty axle shafts. They are built with 50% thicker walled tubing than the OE shafts. Our yokes are machined Forged steel and not the machined cast steel of the OE shafts. We use NASCAR quality solid yoke U-joints instead of hollow yoke joints like the OE. Designed to fit 92-02 Vipers perfectly.
Sold Each
Fits all 1992-2002 Vipers
These are solid yoke NASCAR U-Joints designed to take the stress that causes the OE hollow yoke U-joint to fail.
Fits All Year Vipers.
Our U-Joint strap kits are designed to withstand the rigors of competition use. We recommend replacing them if changing out your U-Joints. Straps include new bolts and straps enough to do 1 U-Joint.
Fits All Year Vipers.
Protect those expensive ignition wires with our 6" long Wire boots. They are rated for 1200 degrees and come in silver, red or black.
Sold in sets of 10. Specify your color choice in the Special Instructions section when ordering.
Fits All Year Vipers.
These OE Ignition Wire Sets were used on the assembly line at Chrysler.
These ignition wire sets are manufactured & tested to the strictest OE Specifications for unparalleled performance. Each Dodge Viper set is precision manufactured for exact replacement...and "1ST TIME FIT".
Fits all 1992-2002 Vipers
These OE Ignition Wire Sets were used on the assembly line at Chrysler. These ignition wire sets are manufactured & tested to the strictest OE Specifications for unparalleled performance. Each Dodge Viper set is precision manufactured for exact replacement...and "1ST TIME FIT".
Fits all 2003-2006 Vipers
Recommended for use in conjunction with the Performance Engine Mounts. Made of the same high dyrometer polyurethane as the engine mounts with the same characteristics.
Pictures show what commonly happens to the OEM mount from moderate use.
'92-'96 RT/10
'97-'02 RT/10
'96-'02 GTS
SRT/10 Convertible
SRT/10 Coupe
Competition Coupe
'08-10 SRT/10 Convertible
'08-10 SRT/10 Coupe
Extended Motor Mount Heat Shields are a must if you have headers or are turbocharged. The extra length of these shields will provide excellent protection from the added heat. These will work with OEM as well as our Woodhouse High performance engine mounts.
Fits All 1992 - 2010 Vipers